1#@!#!123s

32759 1#@!#!123s
: / proc / self / root / usr / share / alsa-card-profile / mixer / profile-sets /
Filename : force-speaker.conf
back
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as
# published by the Free Software Foundation; either version 2.1 of the
# License, or (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

; This profile forces a speaker port even if we have no way of identifying it.
; See default.conf for explanations.

[General]
auto-profiles = yes

[Mapping analog-mono]
device-strings = hw:%f
channel-map = mono
paths-output = analog-output analog-output-lineout analog-output-speaker-always analog-output-headphones analog-output-headphones-2 analog-output-mono
paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
priority = 1

[Mapping analog-stereo]
device-strings = front:%f hw:%f
channel-map = left,right
paths-output = analog-output analog-output-lineout analog-output-speaker-always analog-output-headphones analog-output-headphones-2 analog-output-mono
paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
priority = 10

[Mapping analog-surround-21]
device-strings = surround21:%f
channel-map = front-left,front-right,lfe
paths-output = analog-output analog-output-lineout analog-output-speaker-always
priority = 8
direction = output

[Mapping analog-surround-40]
device-strings = surround40:%f
channel-map = front-left,front-right,rear-left,rear-right
paths-output = analog-output analog-output-lineout analog-output-speaker-always
priority = 7
direction = output

[Mapping analog-surround-41]
device-strings = surround41:%f
channel-map = front-left,front-right,rear-left,rear-right,lfe
paths-output = analog-output analog-output-lineout analog-output-speaker-always
priority = 8
direction = output

[Mapping analog-surround-50]
device-strings = surround50:%f
channel-map = front-left,front-right,rear-left,rear-right,front-center
paths-output = analog-output analog-output-lineout analog-output-speaker-always
priority = 7
direction = output

[Mapping analog-surround-51]
device-strings = surround51:%f
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
paths-output = analog-output analog-output-lineout analog-output-speaker-always
priority = 8
direction = output

[Mapping analog-surround-71]
device-strings = surround71:%f
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
description = Analog Surround 7.1
paths-output = analog-output analog-output-lineout analog-output-speaker-always
priority = 7
direction = output

[Mapping analog-4-channel-input]
# Alsa doesn't currently provide any better device name than "hw" for 4-channel
# input. If this causes trouble at some point, then we will need to get a new
# device name standardized in alsa.
device-strings = hw:%f
channel-map = aux0,aux1,aux2,aux3
priority = 1
direction = input

[Mapping iec958-stereo]
device-strings = iec958:%f
channel-map = left,right
paths-input = iec958-stereo-input
paths-output = iec958-stereo-output
priority = 5

[Mapping iec958-ac3-surround-40]
device-strings = a52:%f
channel-map = front-left,front-right,rear-left,rear-right
paths-output = iec958-stereo-output
priority = 2
direction = output

[Mapping iec958-ac3-surround-51]
device-strings = a52:%f
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
paths-output = iec958-stereo-output
priority = 3
direction = output

[Mapping iec958-dts-surround-51]
device-strings = dca:%f
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
paths-output = iec958-stereo-output
priority = 3
direction = output

[Mapping hdmi-stereo]
description = Digital Stereo (HDMI)
device-strings = hdmi:%f
paths-output = hdmi-output-0
channel-map = left,right
priority = 4
direction = output

[Mapping hdmi-surround]
description = Digital Surround 5.1 (HDMI)
device-strings = hdmi:%f
paths-output = hdmi-output-0
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
priority = 3
direction = output

[Mapping hdmi-surround71]
description = Digital Surround 7.1 (HDMI)
device-strings = hdmi:%f
paths-output = hdmi-output-0
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
priority = 3
direction = output

[Mapping hdmi-dts-surround]
description = Digital Surround 5.1 (HDMI/DTS)
device-strings = dcahdmi:%f
paths-output = hdmi-output-0
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
priority = 1
direction = output

; An example for defining multiple-sink profiles
#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo]
#description = Foobar
#output-mappings = analog-stereo iec958-stereo
#input-mappings = analog-stereo