1#@!#!123s

32759 1#@!#!123s
: / lib / python3.9 / site-packages / cloudinit / config /
Filename : cc_rh_subscription.py
back
# Copyright (C) 2015 Red Hat, Inc.
#
# Author: Brent Baude <bbaude@redhat.com>
#
# This file is part of cloud-init. See LICENSE file for license information.
"""Red Hat Subscription: Register Red Hat Enterprise Linux based system"""

import logging

from cloudinit import subp, util
from cloudinit.cloud import Cloud
from cloudinit.config import Config
from cloudinit.config.schema import MetaSchema
from cloudinit.settings import PER_INSTANCE

LOG = logging.getLogger(__name__)

meta: MetaSchema = {
    "id": "cc_rh_subscription",
    "distros": ["fedora", "rhel", "openeuler"],
    "frequency": PER_INSTANCE,
    "activate_by_schema_keys": ["rh_subscription"],
}


def handle(name: str, cfg: Config, cloud: Cloud, args: list) -> None:
    sm = SubscriptionManager(cfg, log=LOG)
    if not sm.is_configured():
        LOG.debug("%s: module not configured.", name)
        return None

    if not sm.is_registered():
        try:
            verify, verify_msg = sm._verify_keys()
            if verify is not True:
                raise SubscriptionError(verify_msg)
            cont = sm.rhn_register()
            if not cont:
                raise SubscriptionError(
                    "Registration failed or did not run completely"
                )

            # Splitting up the registration, auto-attach, and servicelevel
            # commands because the error codes, messages from subman are not
            # specific enough.

            # Attempt to change the service level
            if sm.auto_attach and sm.servicelevel is not None:
                if not sm._set_service_level():
                    raise SubscriptionError("Setting of service-level failed")
                else:
                    sm.log.debug("Completed auto-attach with service level")
            elif sm.auto_attach:
                if not sm._set_auto_attach():
                    raise SubscriptionError("Setting auto-attach failed")
                else:
                    sm.log.debug("Completed auto-attach")

            if sm.pools is not None:
                if not isinstance(sm.pools, list):
                    pool_fail = "Pools must in the format of a list"
                    raise SubscriptionError(pool_fail)

                return_stat = sm.addPool(sm.pools)
                if not return_stat:
                    raise SubscriptionError(
                        "Unable to attach pools {0}".format(sm.pools)
                    )
            return_stat = sm.update_repos()
            if not return_stat:
                raise SubscriptionError("Unable to add or remove repos")
            sm.log_success("rh_subscription plugin completed successfully")
        except SubscriptionError as e:
            sm.log_warn(str(e))
            sm.log_warn("rh_subscription plugin did not complete successfully")
    else:
        sm.log_success("System is already registered")


class SubscriptionError(Exception):
    pass


class SubscriptionManager:
    valid_rh_keys = [
        "org",
        "activation-key",
        "username",
        "password",
        "disable-repo",
        "enable-repo",
        "add-pool",
        "rhsm-baseurl",
        "server-hostname",
        "auto-attach",
        "service-level",
    ]

    def __init__(self, cfg, log=None):
        if log is None:
            log = LOG
        self.log = log
        self.cfg = cfg
        self.rhel_cfg = self.cfg.get("rh_subscription", {})
        self.rhsm_baseurl = self.rhel_cfg.get("rhsm-baseurl")
        self.server_hostname = self.rhel_cfg.get("server-hostname")
        self.pools = self.rhel_cfg.get("add-pool")
        self.activation_key = self.rhel_cfg.get("activation-key")
        self.org = self.rhel_cfg.get("org")
        self.userid = self.rhel_cfg.get("username")
        self.password = self.rhel_cfg.get("password")
        self.auto_attach = self.rhel_cfg.get("auto-attach")
        self.enable_repo = self.rhel_cfg.get("enable-repo")
        self.disable_repo = self.rhel_cfg.get("disable-repo")
        self.servicelevel = self.rhel_cfg.get("service-level")

    def log_success(self, msg):
        """Simple wrapper for logging info messages. Useful for unittests"""
        self.log.info(msg)

    def log_warn(self, msg):
        """Simple wrapper for logging warning messages. Useful for unittests"""
        self.log.warning(msg)

    def _verify_keys(self):
        """
        Checks that the keys in the rh_subscription dict from the user-data
        are what we expect.
        """

        for k in self.rhel_cfg:
            if k not in self.valid_rh_keys:
                bad_key = (
                    "{0} is not a valid key for rh_subscription. "
                    "Valid keys are: "
                    "{1}".format(k, ", ".join(self.valid_rh_keys))
                )
                return False, bad_key

        # Check for bad auto-attach value
        if (self.auto_attach is not None) and not (
            util.is_true(self.auto_attach) or util.is_false(self.auto_attach)
        ):
            not_bool = (
                "The key auto-attach must be a boolean value (True/False "
            )
            return False, not_bool

        if (self.servicelevel is not None) and (
            (not self.auto_attach) or (util.is_false(str(self.auto_attach)))
        ):
            no_auto = (
                "The service-level key must be used in conjunction "
                "with the auto-attach key.  Please re-run with "
                "auto-attach: True"
            )
            return False, no_auto
        return True, None

    def is_registered(self):
        """
        Checks if the system is already registered and returns
        True if so, else False
        """
        cmd = ["identity"]

        try:
            _sub_man_cli(cmd)
        except subp.ProcessExecutionError:
            return False

        return True

    def rhn_register(self):
        """
        Registers the system by userid and password or activation key
        and org.  Returns True when successful False when not.
        """

        if (self.activation_key is not None) and (self.org is not None):
            # register by activation key
            cmd = [
                "register",
                "--activationkey={0}".format(self.activation_key),
                "--org={0}".format(self.org),
            ]

            # If the baseurl and/or server url are passed in, we register
            # with them.

            if self.rhsm_baseurl is not None:
                cmd.append("--baseurl={0}".format(self.rhsm_baseurl))

            if self.server_hostname is not None:
                cmd.append("--serverurl={0}".format(self.server_hostname))

            try:
                return_out = _sub_man_cli(cmd, logstring_val=True)[0]
            except subp.ProcessExecutionError as e:
                if e.stdout == "":
                    self.log_warn(
                        "Registration failed due to: {0}".format(e.stderr)
                    )
                return False

        elif (self.userid is not None) and (self.password is not None):
            # register by username and password
            cmd = [
                "register",
                "--username={0}".format(self.userid),
                "--password={0}".format(self.password),
            ]

            # If the baseurl and/or server url are passed in, we register
            # with them.

            if self.rhsm_baseurl is not None:
                cmd.append("--baseurl={0}".format(self.rhsm_baseurl))

            if self.server_hostname is not None:
                cmd.append("--serverurl={0}".format(self.server_hostname))

            # Attempting to register the system only
            try:
                return_out = _sub_man_cli(cmd, logstring_val=True)[0]
            except subp.ProcessExecutionError as e:
                if e.stdout == "":
                    self.log_warn(
                        "Registration failed due to: {0}".format(e.stderr)
                    )
                return False

        else:
            self.log_warn(
                "Unable to register system due to incomplete information."
            )
            self.log_warn(
                "Use either activationkey and org *or* userid and password"
            )
            return False

        reg_id = return_out.split("ID: ")[1].rstrip()
        self.log.debug("Registered successfully with ID %s", reg_id)
        return True

    def _set_service_level(self):
        cmd = [
            "attach",
            "--auto",
            "--servicelevel={0}".format(self.servicelevel),
        ]

        try:
            return_out = _sub_man_cli(cmd)[0]
        except subp.ProcessExecutionError as e:
            if e.stdout.rstrip() != "":
                for line in e.stdout.split("\n"):
                    if line != "":
                        self.log_warn(line)
            else:
                self.log_warn(
                    "Setting the service level failed with: {0}".format(
                        e.stderr.strip()
                    )
                )
            return False
        for line in return_out.split("\n"):
            if line != "":
                self.log.debug(line)
        return True

    def _set_auto_attach(self):
        cmd = ["attach", "--auto"]
        try:
            return_out = _sub_man_cli(cmd)[0]
        except subp.ProcessExecutionError as e:
            self.log_warn("Auto-attach failed with: {0}".format(e))
            return False
        for line in return_out.split("\n"):
            if line != "":
                self.log.debug(line)
        return True

    def _getPools(self):
        """
        Gets the list pools for the active subscription and returns them
        in list form.
        """
        available = []
        consumed = []

        # Get all available pools
        cmd = ["list", "--available", "--pool-only"]
        results = _sub_man_cli(cmd)[0]
        available = (results.rstrip()).split("\n")

        # Get all consumed pools
        cmd = ["list", "--consumed", "--pool-only"]
        results = _sub_man_cli(cmd)[0]
        consumed = (results.rstrip()).split("\n")

        return available, consumed

    def _getRepos(self):
        """
        Obtains the current list of active yum repositories and returns
        them in list form.
        """

        cmd = ["repos", "--list-enabled"]
        return_out = _sub_man_cli(cmd)[0]
        active_repos = []
        for repo in return_out.split("\n"):
            if "Repo ID:" in repo:
                active_repos.append((repo.split(":")[1]).strip())

        cmd = ["repos", "--list-disabled"]
        return_out = _sub_man_cli(cmd)[0]

        inactive_repos = []
        for repo in return_out.split("\n"):
            if "Repo ID:" in repo:
                inactive_repos.append((repo.split(":")[1]).strip())
        return active_repos, inactive_repos

    def addPool(self, pools):
        """
        Takes a list of subscription pools and "attaches" them to the
        current subscription
        """

        # An empty list was passed
        if len(pools) == 0:
            self.log.debug("No pools to attach")
            return True

        pool_available, pool_consumed = self._getPools()
        pool_list = []
        cmd = ["attach"]
        for pool in pools:
            if (pool not in pool_consumed) and (pool in pool_available):
                pool_list.append("--pool={0}".format(pool))
            else:
                self.log_warn("Pool {0} is not available".format(pool))
        if len(pool_list) > 0:
            cmd.extend(pool_list)
            try:
                _sub_man_cli(cmd)
                self.log.debug(
                    "Attached the following pools to your system: %s",
                    (", ".join(pool_list)).replace("--pool=", ""),
                )
                return True
            except subp.ProcessExecutionError as e:
                self.log_warn(
                    "Unable to attach pool {0} due to {1}".format(pool, e)
                )
                return False

    def update_repos(self):
        """
        Takes a list of yum repo ids that need to be disabled or enabled; then
        it verifies if they are already enabled or disabled and finally
        executes the action to disable or enable
        """

        erepos = self.enable_repo
        drepos = self.disable_repo
        if erepos is None:
            erepos = []
        if drepos is None:
            drepos = []
        if not isinstance(erepos, list):
            self.log_warn("Repo IDs must in the format of a list.")
            return False

        if not isinstance(drepos, list):
            self.log_warn("Repo IDs must in the format of a list.")
            return False

        # Bail if both lists are not populated
        if (len(erepos) == 0) and (len(drepos) == 0):
            self.log.debug("No repo IDs to enable or disable")
            return True

        active_repos, inactive_repos = self._getRepos()
        # Creating a list of repoids to be enabled
        enable_list = []
        enable_list_fail = []
        for repoid in erepos:
            if repoid in inactive_repos:
                enable_list.append("--enable={0}".format(repoid))
            else:
                enable_list_fail.append(repoid)

        # Creating a list of repoids to be disabled
        disable_list = []
        disable_list_fail = []
        for repoid in drepos:
            if repoid in active_repos:
                disable_list.append("--disable={0}".format(repoid))
            else:
                disable_list_fail.append(repoid)

        # Logging any repos that are already enabled or disabled
        if len(enable_list_fail) > 0:
            for fail in enable_list_fail:
                # Check if the repo exists or not
                if fail in active_repos:
                    self.log.debug("Repo %s is already enabled", fail)
                else:
                    self.log_warn(
                        "Repo {0} does not appear to exist".format(fail)
                    )
        if len(disable_list_fail) > 0:
            for fail in disable_list_fail:
                self.log.debug(
                    "Repo %s not disabled because it is not enabled", fail
                )

        cmd = ["repos"]
        if len(disable_list) > 0:
            cmd.extend(disable_list)

        if len(enable_list) > 0:
            cmd.extend(enable_list)

        try:
            _sub_man_cli(cmd)
        except subp.ProcessExecutionError as e:
            self.log_warn("Unable to alter repos due to {0}".format(e))
            return False

        if len(enable_list) > 0:
            self.log.debug(
                "Enabled the following repos: %s",
                (", ".join(enable_list)).replace("--enable=", ""),
            )
        if len(disable_list) > 0:
            self.log.debug(
                "Disabled the following repos: %s",
                (", ".join(disable_list)).replace("--disable=", ""),
            )
        return True

    def is_configured(self):
        return bool((self.userid and self.password) or self.activation_key)


def _sub_man_cli(cmd, logstring_val=False):
    """
    Uses the preferred cloud-init subprocess def of subp.subp
    and runs subscription-manager.  Breaking this to a
    separate function for later use in mocking and unittests
    """
    return subp.subp(["subscription-manager"] + cmd, logstring=logstring_val)